The growth of mobile services, both official and unofficial go together as more consumers using mobile phones. Both have their own market. Create a consumer who wants security, the choice may be the official service. But he wants to end it once and cheap, unauthorized service option.Well, now began to develop their own services performed. You no longer need to come to the service. Increasingly widespread Flasher software various types of mobile phones in the virtual world allows people to try to fix its own mobile phone.

The developers of hardware and software also was tireless to innovate, including undertaking risky way. Usually flash can only be done by flashing box. Now, some brands and types of mobile phones can be Flash without having to buy a box or dongle. Just use standard data cable that is usually included in the sale of mobile phones or accessories data cable with relatively cheap prices.

That is, if ordinary people can absorb the knowledge and skills, means that each person can do themselves a service if there is damage to the software that is relatively minor. Phones that can be themselves among the ranks flashing Nokia BB5 phones, ie 3250, 5500, 6125, 6126, 6131, 6136, 6233, 6234, 6270, 6280, 6282, 6630, 6680, 6681, 6682, 7370, E50, E60, E61, E62, E70, N70, N71, N72, N73, N80, N90 and N91. Also, some CDMA mobile phone.

Device is needed is a computer with a Pentium III or higher and Windows XP SP2 operating system. Of course, the necessary software intermittent. Well, because this program actually used the official Nokia technician, then tried to innovate Flasher making it crack. The software packages that can be done without flashing box can be downloaded from the Internet. The software package is needed is the following:
1. Nokia Diego 3.70 Sp2.msi
2. Nokia_Connectivity_Cable_Driver_6_80_5_1_eng_uk.msi
3. Phoenix_Service_SW_2006_20_9_148.exe
4. Phoenix 2006 Dongle Crack.exe

The following is the installation of software on top. Note the correct steps have been taken. You see, problems often arise in the process of flashing, but the software installation process that often fails.

The installation sequence is:
- Install Nokia Diego 3:07 Sp2.msi. As counsel to install other applications, simply by clicking Next until you complete the process.
- Install Phoenix_Service_SW_2006_20_9_148.exe.
- Prepare the installation of your crack. But do not start the installation process before the message “Setup can not continue without a dongle. Then click Retry the installation process.

- Make sure the writing is done the DLL written in Windows/System32 crack folder.
- Restart the computer.
- Install Nokia Cable Driver.

Intermittent
Intermittent process risk temporary or permanent damage. Therefore, pay attention to the following:
- Backup all data on your mobile phone memory card.
- Make sure the battery in a complete state.
- Remove the memory card and SIM card.

Another thing to note in this intermittent process that is never unplugged the flash process was carried out and to lower the phone’s firmware version. Downgrade firmware version can be done with flashing APE USW3 Box. If the phone to the earlier ruling Matot, we should do anything that requires flashing FBUS another box. This can not be done with this solution blinking.

The process starts by running Phoenix. The first time you run the software, you are prompted to enter user information. This is done using Phoenix software is for flashing Nokia BB5 new generation that uses cables DKU2. DKU5 using such connections can unlock Nokia CDMA calibration, optimization of the signal channel frequency settings, Edit PRL (Preferred Roaming List inject phone), Phone Information, and others.

DKU5 to use the cable, the unit must be installed first. However, the cable is not necessary to install the drivers DKU2, because as a straight cable (connection). After that, look at the Device Manager how DKU5 COM installed. Then, choose File> Manage Connections> New> and select Media DKU5, select “Manual configuration” and specify which COM DKU2 not need to specify the installation of COM. DKU5 COM installation errors will cause the phone can not be installed correctly detected.

If the configuration of the connection phase is successful, the next step is to connect mobile phone to a computer via a cable. Exemplified by the phone flashes BB5.

Mobile BB5 who has been linked to a computer in a state of connection is detected so that as new devices found. It automatically installs itself necessary drivers. Select File> Analysis of Products, the following will appear online version of the mobile phone software.
Then click Intermittent> SW update, a new Software Update window. Mobile will be detected automatically. Before the flashing process, you must select the firmware to be used. Generally, the firmware in the forums Flasher Flasher shared nationally and abroad.

There are two ways to choose a single product code and an image file (MCU) and PPM files are selected automatically. The second option, manually select image file and PPM file (language pack). In this case we opted for Product Code 0522048 Indonesia Silver Blue with PPM files that would V36 Mobile Indonesia Indonesia targeting.

After the election of the firmware, see Flash Type. There are several options:
- Restore user data: After flashing, the data available in the mobile phone will be returned as usual.

- Products manufactured: The data on the phone is deleted, so the memory conditions will be like a new phone.

The first option is used if the phone is not any problem, I wanted to upgrade it. The second option is used to repair the problem on the phone. If a memory card into the slot, the data is not lost.

The next step, click the Start button and then the flashing process will take care of itself. Wait until the process is complete. Mobile will be normal again with the firmware was updated.

This process aims to update the firmware flashing the phone and add the language used in the menu that did not exist before the desired language.